Printers stopping to work and showing low ink cartridges, though having some inks left can be the worst scenario ever on a busy office day! Epson printer users are probably nodding their heads right now.
Well, if you have extra ink cartridges, it will handle the situation properly. But if not, then what?
Don’t panic. Because this step-by-step guide on How To Bypass Ink Cartridge On Epson Printer can solve this issue.
How Do I Bypass Epson Ink Warning
Changing cartridges is the simplest way to solve this problem. But cartridges are expensive and will cost you heavily. So bypassing ink cartridges is the alternative and will save you from expenses.
In the Epson printer, there are microchip sensors to indicate low ink cartridges. They also indicate if any cartridge is not installed properly. To solve these issues, you can change functions in monitoring and operating systems.
DISABLING MONITOR FUNCTIONS
For using extra ink in the cartridge-
- STEP-1: Go to the control panel and click printer preference.
- STEP-2: After clicking Speed & Progress, a dialogue box will appear. Tap on the box to activate it and it will disable the status monitor.
- STEP-3: After disabling the monitor status, reinstall the cartridges.
Now the nagging message of the low ink indicator will not appear. But you have to keep a sharp eye on the output quality.
Let’s discuss some ways to bypass the Epson ink warning
Method 1: Open And Shut Cartridges Lid
This is the easiest method of the three by which you will not have to encounter low ink cartridges check. For this, you have to follow-
- STEP-1: First, open your printer lid.
- STEP-2: Press on the ink button several times and the ink holder will start to move slowly.
- STEP-3: Now open the empty cartridge lid.
- STEP-4: Then, close the lid without removing the cartridges from the ink holder.
- STEP-5: Close the printer’s lid and your printer is now ready to print.
Well, there is a big but. This method is only applicable for older models of Epson Printers. Now all models have microchips with them in the lid to check ink levels and give alarming messages. If you use this method in new models, the microchips will shut your printer down. And even won’t let your printer until you install new cartridges.
But don’t you worry. There are other methods which will be helpful.
Method 2: Move And Shake The Cartridges
Moving and shaking the cartridges is another method of not encountering ink cartridges check and go with printing. Follow the below-mentioned steps appropriately to get the benefit-
- STEP-1: First, power on your Epson printer and keep it in the standby position.
- STEP-2: Now open your Epson printer cover while the printer is working. You will find the cartridge moving forward and backward.
- STEP-3: Wait for a while for the ink cartridges to stop moving.
- STEP-4: Now power off your Epson printer and you have to wait for a while
- STEP-5: To reset your printer memory, unplug your printers power cord from the main power source
- STEP-6: You have already moved the cartridges in step 4. Now you have to shake all the cartridges properly.
- STEP-7: Replace all the cartridges in their required place appropriately and plug your printer’s power cord with the main power supply.
- STEP-8: Lastly power on your printer and you will find your printer printing.
Method 3: Reset The Ink Cartridges
If the above-mentioned two methods don’t work for your Epson printer’s bypassing ink cartridges, then go for this way. In this way, you have to follow-
- STEP-1: First remove all ink cartridges in the same way mentioned in method 2.
- STEP-2: Then look at the end of all cartridges and you might find a copper contact in the center. Or, some models of Epson printers have a reset button right above the copper contact.
- STEP-3: Now take a paperclip or similar type of object.
- STEP-4: After that, press the copper contact or reset button with the end of the object of all cartridges.
- STEP-5: Now replace all the cartridges in their place of the ink holder.
And now you will find your printer printing again.
Method 4: Trick Your Printer Sensor
This is another method. Or you can say a secret hack of bypassing ink cartridges if your printer doesn’t let you print for low ink. For this, you need any type of opaque object; such as tape (electrical/ duct) and scissors. Follow this –
- STEP-1: First pull out the low ink cartridges. You will get to see a clear plastic part.
- STEP-2: Now slide an opaque object that you have chosen to cover that part accurately.
- STEP-3: Then put the low ink cartridges in their place. And to your utter surprise, you will find your printer printing.
Now pull yourself together in a hurry to finish the unfinished documents and exhale a sigh of relief.
You may now have some questions in your mind. For this let’s look at some FAQs-
FAQs
- Can I Print If One Ink Cartridge Is Empty?
Yes, you can print. If you are using color cartridges and it finishes in the middle of your printing, then it is possible to print documents using Black mode. But it is only for a limited period.
- Why Low Ink Alert Message Showing After Installing New Cartridge?
Epson printers show low ink alert messages if it’s ink cartridge is not installed in the right way. So, if this message appears then read the manual of installing ink cartridge for Epson printer then act accordingly.
Conclusion
The continuous low ink message of Epson printers can be pretty annoying. But this step-by-step guide on How To Bypass Ink Cartridge On Epson Printer can help you solve this.
Moreover, changing cartridges frequently will cost you broadly. So why will you waste your money?
Rather bypass ink cartridges and print without any hassle. But don’t forget to turn off the switch after you finish your printing. As we have only one earth to live and save!
You may Also Like:
