How To Reset Rollo Printer – A Step-By-Step Guideline

Having trouble with your Rollo printer? 

Then a simple reset can solve it instantly. There are a few reasons why you might need to factory reset your Rollo printer. Maybe you’ve forgotten your password, or you’ve installed a new operating system and can’t get the printer to work. 

Whatever the reason, it’s not difficult to reset your Rollo printer. 

Just follow my step-by-step guideline on how to reset rollo printer and the rest process will end in no time. 

How To Reset Rollo Printer

If you are having problems with your Rollo printer, it may be necessary to reset the printer. Resetting a Rollo printer is a pretty straightforward process and it takes only a few minutes.  

Here is how To reset Rollo printer, you will need to follow these steps:

1. Turn off the printer.

2. Unplug the printer from the power outlet.

3. Plug the printer back into the power outlet.

4. Turn on the printer.

5. The printer should now be reset.

However, it’s a simple reset and might not always solve the problem. So, you might need to factory reset your Rollo printer. But How? 

How To Factory Reset Rollo Printer

There may come a time when you need to factory reset your Rollo printer. Perhaps you are experiencing problems with your printer and a reset is your last hope, or you are selling your printer and want to ensure that your personal data is wiped clean. 

First, let’s look at the things needed. 

Things You Will Require 

Before you begin the factory reset, make sure you have 

  1. Printer’s power cord
  2. USB cable
  3. Paper clip or pin

Follow the below process for factory resetting your Rollo printer

  1. Turn on your printer and wait for it to boot up.
  2. Open the printer’s cover.
  3. Locate the small hole on the side of the printer and use a paper clip or something similar to reset the printer.
  4. Hold the paper clip in the reset hole for about 10 seconds and the resetting will start. 

If you do not want the hassle to open up the printer then follow the below process to factory reset your Rollo printer. 

  • First, make sure that your printer is turned on. If it’s not, press the power button to turn it on.
  • Plug the printer’s power cord into an outlet and plug the USB cable into your computer.
  • Next, connect the printer to your computer with the USB cable.
  • Once the printer is connected, open up the Start menu and click on the “Control Panel” icon.
  • Next, click on the ” Devices and Printers ” icon.
  • In the list of devices, you should see your Rollo printer. 
  • Right-click on the printer and select ” Printer Properties “.
  • In the Properties window, click on the ” Maintenance ” tab.
  • In the Maintenance tab, click on the ” Reset to Factory Defaults ” button and the resetting process will start. 

However, you do not always need to reset the printer to solve smaller issues. You can solve them by troubleshooting too. But How? 

Rollo Printer Troubleshooting

The Rollo printer is a common printer used in many homes and small businesses. However, like all printers, it can sometimes experience problems. If you are experiencing problems with your Rollo printer, there are a few things you can do to troubleshoot the issue.

  1. First, try turning the printer off and on again. This is often a simple solution to many printer problems.
  2. In case turning the printer off and on again doesn’t work, try printing a test page. This can help you determine if the problem is with the printer or with the document you are trying to print.
  3. When the printer is printing correctly, but the document is not, try printing the document in a different program. This can help you determine if the problem is with the document itself or with the program you are using to print it.
  4. If the printer is not printing at all, try uninstalling and reinstalling the printer driver. This can often fix printer problems. 

However, when any of these does not work then factory reset your printer. 

Lastly, if you are facing a problem connecting your Rollo printer to Shopify then check out our article on connecting Rollo printers to Shopify.  

Now let’s have a look at some of the frequently asked questions related to this topic. 

FAQ

1. Why Is My Rollo Printer Not Printing?

There could be a few reasons why your Rollo printer is not printing. One reason might be that there is no paper in the printer. Another reason might be that the printer is not turned on. Finally, the printer might be experiencing a technical issue that needs to be fixed. If you are experiencing a technical issue, please contact Rollo support for assistance.

2. Why Is The Red Light Blinking On My Rollo Printer?

There are several reasons why the red light might be blinking on your Rollo printer. It could be that the printer is out of paper, there might a paper jam, or the printer is experiencing a hardware error. If the red light is blinking, try unplugging the printer, waiting a few seconds, and plugging it back in. If the light continues to blink, there might be a more serious problem and you should contact Rollo customer service.

3. What Does The Blue Light On Rollo Mean?

The blue light on a Rollo printer indicates that the printer is trying to connect to the wifi. This often happens when you have a wireless Rollo printer and it can not connect to the wifi. So, if you experience this then check out whether your wifi connection is ok or not.   

Final Words

This is everything you need to know on how to reset Rollo printer In 2022. We hope you have found it useful. Let us know if you have any questions. 

Lastly, if a factory reset does not solve your problem then claim your warranty or contact Rollo customer care for solving it. They provide excellent service so you don’t have to worry. 

That’s all for today. Thanks for staying with us till here. Have a very nice day!